for concrete flooring
Protective coating products from AkzoNobel’s International® range have been protecting assets for over 100 years. The Interbuild® range complements our existing products by providing solutions for the preparation, repair, rehabilitation and protection of concrete flooring.
Take a look at our
case studies
Petrotec
Case Study 1
Case Study 2
coating solutions
Specialized
Concrete flooring
Concrete flooring is used extensively across a range of markets and requires protection against chemical attack, abrasion, impact and a variety of other
factors that could damage the surface.
The Interbuild range consists of products and systems designed to protect and extend the life of the floors when required to provide an aesthetically pleasing finish.
To ensure the best system performance, our Interbuild products are only installed by trained, competent and qualified applicators. Training is delivered by our technical experts and is carried out in our state of the art training centre based in Dubai or on-site.
Each product and system in the Interbuild range has been extensively tested by internationally recognized third party laboratories.
We combine the best products from our portfolio to solve your specific flooring challenges.
Flooring range products
Interbuild 1002
Interbuild 1002 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
Visit Interbuild 1002 product page
Discover how Interbuild products benefit our customers
Interbuild 1004
Interbuild 1071
Interbuild 1072
Interbuild 1091
For more information regarding the Interbuild flooring range, please complete the below information and we will be in touch with you shortly
Interbuild 1091
Interbuild 1072
Interbuild 1071
Interbuild 1002
Interbuild 1004
Visit Interbuild 1004 product page
Interbuild 1004 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1004 is especially suited for properly prepared concrete substrates.
Interbuild 1091
Interbuild 1072
Interbuild 1004
Interbuild 1071
Visit Interbuild 1071 product page
Interbuild 1071 is a two component, solvent free, heavy duty epoxy floor coating. It is a self smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance designed as part of a thin film coating system.
Interbuild 1002
Interbuild 1091
Interbuild 1071
Interbuild 1072
Visit Interbuild 1072 product page
Interbuild 1072 is a low VOC, two component high build, high solids epoxy floor coating, reinforced with high aspect ratio glass flake. It has excellent chemical, abrasion and impact resistance. Can be applied directly in two coats or on approved primers depending on the conditions of the concrete substrate. Interbuild 1072 is designed to be used in high traffic areas.
Interbuild 1004
Interbuild 1002
Interbuild 1072
Interbuild 1091
Visit Interbuild 1091 product page
Interbuild 1091 is a two component isocyanate cured polyurethane coating. It is a high performance, nonyellowing product. It is easy to apply. This product is tintable in a wide range of colours. It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced slip resistance is required GM Non Slip can be used in the system. To be used as topcoat in atmospheric environments. Interbuild 1091 is best suited for light traffic areas.
Interbuild 1071
Interbuild 1004
Interbuild 1002
Interbuild 1091
Interbuild 1072
Interbuild 1071
Interbuild 1004
Interbuild 1002
Case Study 1
Case Study 2
Project
Project size
Project type
Products used
Location
Date
Customer quotation
Petrotec workshop
Maintenance and repair
1200 ltrs, 800 sq. ft.
Interbuild 1094, Interbuild 1091
Doha, Qatar
December 2021
The workshop area flooring suffers continuous traffic with heavy lifting and forklift operation, creating mechanical and abrasion impact. International recommended a high solids smoothing coating which helped the coating remain intact even with mechanical and abrasion impact.
Product application could be carried out with ease and was user-friendly, wit no major damage or repair work to the coating, after use. The re-coating interval and drying times helped the applicator to complete their work quickly, ahead of schedule.
Customer quotation
April 2019
Date
Duqm, Sultanate of Oman
Location
Interbuild 1003, Interbuild 1073, Interbuild 1091
Products used
1200 ltrs, 3000 sq. ft.
Project size
New construction, flooring
Project type
First Filter production shed
Project
First Filter
Interbuild 1091
أضغط هنا للغة العربية