Presentamos nuestro sistema prémium de pintura para obra muerta de nueva generación, con resultados de nivel profesional en un acabado monocomponente fácil de usar.
Toplac Plus proporciona un acabado de alto brillo de la máxima categoría, con una protección ultravioleta más duradera que, además, es fácil de aplicar con rodillo sin necesidad de peinar con brocha, y está disponible en una gama completa de vistosos colores.
Visite international-yachtpaint.com para ver la disponibilidad de colores según el país
Snow White
YLK000 (001)
Mediterranean White
YLK184 (545)
Matterhorn White
YLK198 (199)
Rescue Orange
YLK265 (265)
Oyster White
YLK194 (195)
Ivory
YLK187 (812)
Cream
YLK027 (027)
Fire Red
YLK504 (504)
Mauritius Blue
YLK904 (018)
Rustic Red
YLK501 (501)
Bondi Blue
YLK898 (016)
Lauderdale Blue
YLK936 (936)
Sapphire Blue
YLK830 (830)
Oxford Blue
YLK993 (105)
Flag Blue
YLK990 (992)
Platinum
YLK151 (151)
Atlantic Gray
YLK684 (289)
Jet Black
YKL999 (051)
Yellow
YLK101 (101)
Rochelle Red
YLK299 (011)
Bounty
YLK292 (350)
Donegal Green
YLK541 (077)
One UP
Dos en uno: imprimación y capa de fondo para acabados monocomponente
Reduce la complejidad del sistema para sustratos metálicos
Ofrece un acabado más liso, con protección añadida para el sustrato
Formulado para mejorar la apariencia estética de Toplac Plus
El mejor sistema de su categoría, con acabados y pinturas para cubiertas monocomponente de International en todos los sustratos
Menores emisiones de COV
Fácil de aplicar mediante brocha o rodillo, con una fluidez y un nivelado excelentes
Más fácil de lijar que One UP, lo que reduce el tiempo requerido entre capas
Aprenda a mezclar One UP
Aplique sobre One UP, nuestra capa base e imprimación de un solo componente, todo en uno, con protección del sustrato, un acabado extra suave y menores COV.
Toplac Plus
Acabado brillante prémium de alta durabilidad para yates
Acabado de calidad profesional
La nueva fórmula con mayor fluidez elimina la necesidad de peinar con brocha al usar rodillo
No es necesario lijar entre capas
Mejor protección UV para retener el brillo y el color
Nivel de brillo excepcional
Descubrir más
Lograr un acabado asombroso nunca fue tan fácil.
Got questions? Check out our FAQ's
Pre-Kote Plus FAQ's
Toplac Plus FAQ's
Descargar
Descargue el folleto para saber qué pueden hacer por usted Toplac Plus y One UP
Encontrar un minorista
Compra ahora
¿Necesita más ayuda? Póngase en contacto
yacht.spain@akzonobel.com
Colores disponibles
Seleccione un color
One UP Viscosidad y mezcla
1. Al abrir, el producto puede presentar un aspecto sólido o viscoso.
2. Antes de mezclar, el bote se podrá poner boca abajo sin que se derrame producto.
3. One UP debe mezclarse bien para lograr la consistencia adecuada.
4. Una vez mezclado, el producto adquirirá la fluidez necesaria y se podrá verter.
Questions and answers
Can Pre-Kote Plus and Pre-Kote be physically mixed together?
No, they are not fully compatible with each other.
Can Pre-Kote Plus be applied over Pre-Kote if half-way through a job?
Yes.
Can Pre-Kote be applied over Pre-Kote Plus?
Yes, but not recommended as the full properties of Toplac Plus
may not be obtained.
Can Toplac be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Pre-Kote Plus be applied over Interprotect?
Yes.
I have previously used a primer in timber bilges without overcoating because it was fast dry and easy to apply. Could I use Pre-Kote Plus for the same type of job?
Yes, but use the Blue-Gray product.
Can Pre-Kote Plus be used on Clear Epoxies like West System, Hawk Epoxy, or System Three epoxies?
No, it cannot not be directly applied due to the amine in the epoxy. Recommend to use either Epoxy Primekote 404/414 or InterProtect 2000E over this substrate and then finish off with Pre-Kote Plus as the final primer prior to topcoat.
Would the White Pre-Kote Plus yellow if used in interior and not overcoated with gloss finish?
Most single part finishes tend to yellow in the dark but recover if exposed to light. For example, if used in dry bilge areas it would be wise to use the Blue-Gray Pre-Kote Plus as any yellowing would not be so noticeable.
Can I add other products/additives to Pre-Kote Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product. Pre Kote Plus can be sprayed with Special Thinner 216.
Questions and answers
Can Toplac Plus be applied over recently applied Brightside?
Yes, with light sanding with P400.
Can Brightside be mixed with Toplac Plus?
No. To avoid wasting any Brightside you might use it either as a first
coat before switching to Toplac Plus.
Can Toplac Plus be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Toplac Plus be applied over Pre-Kote?
Yes, but the enhanced gloss and DOI levels of Toplac Plus may not be fully obtained.
Is Toplac Plus suitable for use on decks with Intergrip added, or
will it be too slippery?
We would recommend the use of Interdeck for decks. Toplac Plus would present the same finish as Brightside with Intergrip added and both would have very similar levels of slip resistance. Actual levels of slip resistance would vary depending on the level of Intergrip added and how evenly it was applied.
Do Toplac Plus colors match the previous Brightside colors
where the color name are the same?
Toplac Plus is not an exact match to Brightside due the new raw
materials used in Toplac Plus, but as with any manufactured color you should always ensure you have the same batch number product to complete any given job. Using Brightside with Toplac Plus of the same
code/color side by side for example may well show a tonal difference that can be affected by very slight color differences andgloss levels. It is best to use any Brightside you have as a first coat, perhaps blended with Pre-Kote Plus and finish with Toplac Plus.
Can I add other products/additives to Toplac Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Flattening Agent for one part finishes can be used to create a variety of gloss, satin or matt effects.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product as they would have both. If sprayed Special Thinner 216 is recommended for Toplac Plus.
What equipment (roller/brush) should I use with Toplac Plus?
We recommend to use a fine, thermo-bonded foam roller. Suitable rollers are listed below:
4” High Density Foam Rollers (rounded edges)
6” Closed Cell Foam Rollers (flat edges, cut into 3” sections)
6” Ultra Smooth High Density Foam Rollers (rounded edges)
If a brush is required then any natural bristle brush would be recommended.
Descubrir más
Off White
YLK192 (193)
White
YLK905 (905)
White
YLK905 (905)
Off White
YLK192 (193)
