Kullanımı kolay tek komponentli bir finişte profesyonel düzeyde sonuçlar sağlayan yeni nesil, birinci sınıf son kat sistemimizi sunuyoruz.
Toplac Plus, eksiksiz canlı renkler yelpazesinde sunulan, rötuş gerektirmeyen, olağanüstü rulo uygulamasıyla kolayca uygulanan, daha uzun ömürlü UV korumasına sahip, sınıfının en iyisi yüksek parlaklıkta bir finiş sağlar.
Ülkeye göre kullanılabilir renkleri görmek için international-yachtpaint.com sitesini ziyaret edin
Snow White
YLK000 (001)
Mediterranean White
YLK184 (545)
Matterhorn White
YLK198 (199)
Rescue Orange
YLK265 (265)
Oyster White
YLK194 (195)
Ivory
YLK187 (812)
Cream
YLK027 (027)
Fire Red
YLK504 (504)
Mauritius Blue
YLK904 (018)
Rustic Red
YLK501 (501)
Bondi Blue
YLK898 (016)
Lauderdale Blue
YLK936 (936)
Sapphire Blue
YLK830 (830)
Oxford Blue
YLK993 (105)
Flag Blue
YLK990 (992)
Platinum
YLK151 (151)
Atlantic Gray
YLK684 (289)
Jet Black
YKL999 (051)
Yellow
YLK101 (101)
Rochelle Red
YLK299 (011)
Bounty
YLK292 (350)
Donegal Green
YLK541 (077)
One UP
Tek Komponentli Finişler için İkisi Bir Arada Astar ve Arakat
Metal yüzeyler için daha düşük sistem karmaşıklığı
Ek yüzey korumasıyla daha pürüzsüz bir finiş sağlar
Toplac Plus'ın estetik görünümünü iyileştirecek şekilde formüle edilmiştir
Interlux tek komponentli finişler ve güverte boyalarıyla tüm yüzeylerde sınıfının en iyisi sistem
Daha düşük VOC
Mükemmel akış ve tesviye ile, fırça ve rulo ile kolayca uygulanır
One UP’den daha kolay zımparalandığı için katlar arasında gereken süreyi azaltır
One UP’yi nasıl karıştıracağınızı öğrenin
Substrat koruması, ekstra pürüzsüz yüzey ve daha düşük VOC değerlerine sahip, tek parçalı astar ve astarımız One UP üzerine uygulayın.
Toplac Plus
Yüksek Mukavemetli Özel Parlak Tekne Finişi
Profesyonel Kalitede Finiş
Geliştirilmiş akışlı yeni formül, rulo kullanırken rötuş ihtiyacını ortadan kaldırır
Katlar arasında zımpara yapmaya gerek yoktur
Parlaklık ve renk tutma için geliştirilmiş UV koruması
Olağanüstü parlaklık seviyesi
Daha fazla bilgi edinin
Göz alıcı bir finiş hiç bu kadar kolay olmamıştı.
Got questions? Check out our FAQ's
Pre-Kote Plus FAQ's
Toplac Plus FAQ's
İndirin
Toplac Plus ve One UP Plus’ın sizin için neler yapabileceği konusunda daha fazla bilgi edinmek için broşürü indirin.
Bir satıcı bulun
şimdi satın al
Hala yardıma mı ihtiyacınız var? İletişime geçin.
kenan.besli@akzonobel.com
Mevcut renkler
Bir renk seçin
One UP Viskozite ve Karıştırma
1. İlk açıldığında bu ürün katı veya viskoziteli görünebilir veya hissedilebilir.
2. Karıştırmaksızın ürün ters düz edilebilir ve tenekeden akmaz veya dökülmez.
3. Doğru tutarlılığı elde etmek için Pre-Kote Plus iyice karıştırılmalıdır.
4. İyice karıştırıldıktan sonra ürün tenekeden akıp dökülebilmelidir ve kullanıma hazırdır.
Questions and answers
Can Pre-Kote Plus and Pre-Kote be physically mixed together?
No, they are not fully compatible with each other.
Can Pre-Kote Plus be applied over Pre-Kote if half-way through a job?
Yes.
Can Pre-Kote be applied over Pre-Kote Plus?
Yes, but not recommended as the full properties of Toplac Plus
may not be obtained.
Can Toplac be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Pre-Kote Plus be applied over Interprotect?
Yes.
I have previously used a primer in timber bilges without overcoating because it was fast dry and easy to apply. Could I use Pre-Kote Plus for the same type of job?
Yes, but use the Blue-Gray product.
Can Pre-Kote Plus be used on Clear Epoxies like West System, Hawk Epoxy, or System Three epoxies?
No, it cannot not be directly applied due to the amine in the epoxy. Recommend to use either Epoxy Primekote 404/414 or InterProtect 2000E over this substrate and then finish off with Pre-Kote Plus as the final primer prior to topcoat.
Would the White Pre-Kote Plus yellow if used in interior and not overcoated with gloss finish?
Most single part finishes tend to yellow in the dark but recover if exposed to light. For example, if used in dry bilge areas it would be wise to use the Blue-Gray Pre-Kote Plus as any yellowing would not be so noticeable.
Can I add other products/additives to Pre-Kote Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product. Pre Kote Plus can be sprayed with Special Thinner 216.
Questions and answers
Can Toplac Plus be applied over recently applied Brightside?
Yes, with light sanding with P400.
Can Brightside be mixed with Toplac Plus?
No. To avoid wasting any Brightside you might use it either as a first
coat before switching to Toplac Plus.
Can Toplac Plus be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Toplac Plus be applied over Pre-Kote?
Yes, but the enhanced gloss and DOI levels of Toplac Plus may not be fully obtained.
Is Toplac Plus suitable for use on decks with Intergrip added, or
will it be too slippery?
We would recommend the use of Interdeck for decks. Toplac Plus would present the same finish as Brightside with Intergrip added and both would have very similar levels of slip resistance. Actual levels of slip resistance would vary depending on the level of Intergrip added and how evenly it was applied.
Do Toplac Plus colors match the previous Brightside colors
where the color name are the same?
Toplac Plus is not an exact match to Brightside due the new raw
materials used in Toplac Plus, but as with any manufactured color you should always ensure you have the same batch number product to complete any given job. Using Brightside with Toplac Plus of the same
code/color side by side for example may well show a tonal difference that can be affected by very slight color differences andgloss levels. It is best to use any Brightside you have as a first coat, perhaps blended with Pre-Kote Plus and finish with Toplac Plus.
Can I add other products/additives to Toplac Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Flattening Agent for one part finishes can be used to create a variety of gloss, satin or matt effects.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product as they would have both. If sprayed Special Thinner 216 is recommended for Toplac Plus.
What equipment (roller/brush) should I use with Toplac Plus?
We recommend to use a fine, thermo-bonded foam roller. Suitable rollers are listed below:
4” High Density Foam Rollers (rounded edges)
6” Closed Cell Foam Rollers (flat edges, cut into 3” sections)
6” Ultra Smooth High Density Foam Rollers (rounded edges)
If a brush is required then any natural bristle brush would be recommended.
Daha fazla bilgi edinin
Off White
YLK192 (193)
White
YLK905 (905)
White
YLK905 (905)
Off White
YLK192 (193)