Toplac-Plus and One-Up SE

Vi presenterar nästa generation premiumsystem för lackfärger, med proffsiga resultat med en lättanvänd enkomponentlack.

Toplac Plus ger en högblank finish i toppklass med ett långvarigt UV-skydd. Denna sträcklack är lätt att applicera, med fantastiska egenskaper vid applicering med rulle utan att man behöver eftersläta och den finns i ett brett urval av kulörer. Besök international-yachtpaint.com för att hitta kulörerna som erbjuds i ditt land

Snow White YLK000 (001)

Mediterranean White YLK184 (545)

Matterhorn White YLK198 (199)

Rescue Orange YLK265 (265)

Oyster White YLK194 (195)

Ivory YLK187 (812)

Cream YLK027 (027)

Fire Red YLK504 (504)

Mauritius Blue YLK904 (018)

Rustic Red YLK501 (501)

Bondi Blue YLK898 (016)

Lauderdale Blue YLK936 (936)

Sapphire Blue YLK830 (830)

Oxford Blue YLK993 (105)

Flag Blue YLK990 (992)

Platinum YLK151 (151)

Atlantic Gray YLK684 (289)

Jet Black YKL999 (051)

Yellow YLK101 (101)

Rochelle Red YLK299 (011)

Bounty YLK292 (350)

Donegal Green YLK541 (077)

One UP

Två-i-en primer och lackgrundfärg för enkomponent lackfärger

Mindre komplicerat system för metaller

Ger en jämnare yta med extra skydd av underlaget

Framtagen för att framhäva Toplac Plus utseende

System i toppklass tillsammans med International enkomponentslacker och däcksfärger, för alla underlag

Mindre VOC

Lätt att applicera och flyter ut till en slät yta med både pensel och rulle

Lättare att slipa än Pre-Kote, vilket minskar tidsåtgången mellan skikten

Så här blandar du One UP

Grundmåla med One UP, vår 1-komponent allt-i-ett primer och lackgrund med låg VOC som skyddar underlaget och ger en extra slät finish.

Toplac Plus

Premium slitstark blank lackfärg för båt

Proffsig finish

Den nya formeln flyter ut bättre och eliminerar behovet av efterslätning när du använder en rulle

Ingen slipning behövs mellan skikten

Förbättrat UV-skydd för bibehållen glans och kulör

Läs mer

Aldrig har det varit lättare att få en fantastisk finish.

Got questions? Check out our FAQ's

Pre-Kote Plus FAQ's

Toplac Plus FAQ's

Ladda ner

Ladda ner bladet för att veta mer om vad Toplac Plus och One UP kan göra för dig?

Hitta en återförsäljare

shoppa nu

Still need help? Get in touch. iyp.sverige@akzonobel.com

Tillgängliga kulörer Välj kulör

One UP Viskositet och blandning

1. Produkten kan verka tjock och trögflytande när burken öppnas.

2. Innan man har rört om i burken är produkten så tjock att burken kan vändas upp och ner utan att färgen rinner ur burken.

3. One UP måste blandas ordentligt för att få rätt konsistens.

4. När den väl har blandats ordentligt är den tunnare och kan hällas ur burken och är klar att användas.

Questions and answers

Can Pre-Kote Plus and Pre-Kote be physically mixed together? No, they are not fully compatible with each other. Can Pre-Kote Plus be applied over Pre-Kote if half-way through a job? Yes. Can Pre-Kote be applied over Pre-Kote Plus? Yes, but not recommended as the full properties of Toplac Plus may not be obtained. Can Toplac be blended with Pre-Kote Plus? Yes, follow recommendations as for Toplac Plus. Can Pre-Kote Plus be applied over Interprotect? Yes. I have previously used a primer in timber bilges without overcoating because it was fast dry and easy to apply. Could I use Pre-Kote Plus for the same type of job? Yes, but use the Blue-Gray product.

Can Pre-Kote Plus be used on Clear Epoxies like West System, Hawk Epoxy, or System Three epoxies? No, it cannot not be directly applied due to the amine in the epoxy. Recommend to use either Epoxy Primekote 404/414 or InterProtect 2000E over this substrate and then finish off with Pre-Kote Plus as the final primer prior to topcoat. Would the White Pre-Kote Plus yellow if used in interior and not overcoated with gloss finish? Most single part finishes tend to yellow in the dark but recover if exposed to light. For example, if used in dry bilge areas it would be wise to use the Blue-Gray Pre-Kote Plus as any yellowing would not be so noticeable. Can I add other products/additives to Pre-Kote Plus? No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Can the product be sprayed? We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product. Pre Kote Plus can be sprayed with Special Thinner 216.

Questions and answers

Can Toplac Plus be applied over recently applied Brightside? Yes, with light sanding with P400. Can Brightside be mixed with Toplac Plus? No. To avoid wasting any Brightside you might use it either as a first coat before switching to Toplac Plus. Can Toplac Plus be blended with Pre-Kote Plus? Yes, follow recommendations as for Toplac Plus. Can Toplac Plus be applied over Pre-Kote? Yes, but the enhanced gloss and DOI levels of Toplac Plus may not be fully obtained. Is Toplac Plus suitable for use on decks with Intergrip added, or will it be too slippery? We would recommend the use of Interdeck for decks. Toplac Plus would present the same finish as Brightside with Intergrip added and both would have very similar levels of slip resistance. Actual levels of slip resistance would vary depending on the level of Intergrip added and how evenly it was applied. Do Toplac Plus colors match the previous Brightside colors where the color name are the same? Toplac Plus is not an exact match to Brightside due the new raw materials used in Toplac Plus, but as with any manufactured color you should always ensure you have the same batch number product to complete any given job. Using Brightside with Toplac Plus of the same

code/color side by side for example may well show a tonal difference that can be affected by very slight color differences andgloss levels. It is best to use any Brightside you have as a first coat, perhaps blended with Pre-Kote Plus and finish with Toplac Plus. Can I add other products/additives to Toplac Plus? No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Flattening Agent for one part finishes can be used to create a variety of gloss, satin or matt effects. Can the product be sprayed? We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product as they would have both. If sprayed Special Thinner 216 is recommended for Toplac Plus. What equipment (roller/brush) should I use with Toplac Plus? We recommend to use a fine, thermo-bonded foam roller. Suitable rollers are listed below: 4” High Density Foam Rollers (rounded edges) 6” Closed Cell Foam Rollers (flat edges, cut into 3” sections) 6” Ultra Smooth High Density Foam Rollers (rounded edges) If a brush is required then any natural bristle brush would be recommended.

Läs mer

Off White YLK192 (193)

White YLK905 (905)

Off White YLK192 (193)