Toplac-Plus and One-Up DK

Vi præsenterer vores næste generation af førsteklasses finishsystem med et professionelt resultat i en brugervenlig 1-komponentfinish.

Med Toplac Plus opnås en best in class-højglansfinish med UV-beskyttelse, der holder længere. Den er nem at påføre med rulle uden behov for at glatte efter med pensel og fås i en lang række flotte farver. Besøg international-yachtpaint.com for at se tilgængelige farver i dit land

Snow White YLK000 (001)

Mediterranean White YLK184 (545)

Matterhorn White YLK198 (199)

Rescue Orange YLK265 (265)

Oyster White YLK194 (195)

Ivory YLK187 (812)

Cream YLK027 (027)

Fire Red YLK504 (504)

Mauritius Blue YLK904 (018)

Rustic Red YLK501 (501)

Bondi Blue YLK898 (016)

Lauderdale Blue YLK936 (936)

Sapphire Blue YLK830 (830)

Oxford Blue YLK993 (105)

Flag Blue YLK990 (992)

Platinum YLK151 (151)

Atlantic Gray YLK684 (289)

Jet Black YKL999 (051)

Yellow YLK101 (101)

Rochelle Red YLK299 (011)

Bounty YLK292 (350)

Donegal Green YLK541 (077)

One UP

2-i-1-primer og grunder til 1-komponent-finishmalinger

Mindre komplekst system til metalsubstrater

Giver en glat finish med ekstra substratbeskyttelse

Udarbejdet til at fremhæve det æstetiske udseende af Toplac Plus

Best in class-system med International 1-komponent finish- og dækmalinger, til alle substrater

Reduceret VOC

Let at påføre med pensel eller rulle med fremragende sammenflydning og udjævning

Nemmere at slibe end Pre-Kote, hvilket reducerer tidsforbruget mellem lagene

Se, hvordan du blander One UP

Påfør over One UP, vores alt-i-en grund og primer med underlagsbeskyttelse, en ekstra glat finish og lavare VOC.

Toplac Plus

Førsteklasses slidstærk finishmaling i højglans til din båd

Professionel kvalitetsfinish

Ny formel med forbedret sammenflydning fjerner behovet for at glatte efter med en pensel, når man bruger en rulle

Ingen slibning mellem lagene

Forbedret UV-beskyttelse bevarer glans og farve

Fremragende glansniveau

Læs mere

Det har aldrig været nemmere at få en flot finish.

Got questions? Check out our FAQ's

Pre-Kote Plus FAQ's

Toplac Plus FAQ's

Download

Download folderen, og læs mere om, hvordan du kan bruge Toplac Plus og One UP.

Find en forhandler

shop nu

Brug for hjælp? Kontakt os. palby@palby.dk

Tilgængelige farver Vælg en farve

One UP Viskositet og blanding

1. Når dåsen åbnes, kan produktet synes og føles solidt eller tyktflydende.

2. Uden at være blandet kan produktet vendes på hovedet, uden at det flyder ud af dåsen.

3. One UP skal blandes grundigt for at få den rigtige konsistens.

4. Når det er blandet grundigt, bliver produktet flydende, kan hældes ud af dåsen og er klar til brug.

Questions and answers

Can Pre-Kote Plus and Pre-Kote be physically mixed together? No, they are not fully compatible with each other. Can Pre-Kote Plus be applied over Pre-Kote if half-way through a job? Yes. Can Pre-Kote be applied over Pre-Kote Plus? Yes, but not recommended as the full properties of Toplac Plus may not be obtained. Can Toplac be blended with Pre-Kote Plus? Yes, follow recommendations as for Toplac Plus. Can Pre-Kote Plus be applied over Interprotect? Yes. I have previously used a primer in timber bilges without overcoating because it was fast dry and easy to apply. Could I use Pre-Kote Plus for the same type of job? Yes, but use the Blue-Gray product.

Can Pre-Kote Plus be used on Clear Epoxies like West System, Hawk Epoxy, or System Three epoxies? No, it cannot not be directly applied due to the amine in the epoxy. Recommend to use either Epoxy Primekote 404/414 or InterProtect 2000E over this substrate and then finish off with Pre-Kote Plus as the final primer prior to topcoat. Would the White Pre-Kote Plus yellow if used in interior and not overcoated with gloss finish? Most single part finishes tend to yellow in the dark but recover if exposed to light. For example, if used in dry bilge areas it would be wise to use the Blue-Gray Pre-Kote Plus as any yellowing would not be so noticeable. Can I add other products/additives to Pre-Kote Plus? No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Can the product be sprayed? We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product. Pre Kote Plus can be sprayed with Special Thinner 216.

Questions and answers

Can Toplac Plus be applied over recently applied Brightside? Yes, with light sanding with P400. Can Brightside be mixed with Toplac Plus? No. To avoid wasting any Brightside you might use it either as a first coat before switching to Toplac Plus. Can Toplac Plus be blended with Pre-Kote Plus? Yes, follow recommendations as for Toplac Plus. Can Toplac Plus be applied over Pre-Kote? Yes, but the enhanced gloss and DOI levels of Toplac Plus may not be fully obtained. Is Toplac Plus suitable for use on decks with Intergrip added, or will it be too slippery? We would recommend the use of Interdeck for decks. Toplac Plus would present the same finish as Brightside with Intergrip added and both would have very similar levels of slip resistance. Actual levels of slip resistance would vary depending on the level of Intergrip added and how evenly it was applied. Do Toplac Plus colors match the previous Brightside colors where the color name are the same? Toplac Plus is not an exact match to Brightside due the new raw materials used in Toplac Plus, but as with any manufactured color you should always ensure you have the same batch number product to complete any given job. Using Brightside with Toplac Plus of the same

code/color side by side for example may well show a tonal difference that can be affected by very slight color differences andgloss levels. It is best to use any Brightside you have as a first coat, perhaps blended with Pre-Kote Plus and finish with Toplac Plus. Can I add other products/additives to Toplac Plus? No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Flattening Agent for one part finishes can be used to create a variety of gloss, satin or matt effects. Can the product be sprayed? We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product as they would have both. If sprayed Special Thinner 216 is recommended for Toplac Plus. What equipment (roller/brush) should I use with Toplac Plus? We recommend to use a fine, thermo-bonded foam roller. Suitable rollers are listed below: 4” High Density Foam Rollers (rounded edges) 6” Closed Cell Foam Rollers (flat edges, cut into 3” sections) 6” Ultra Smooth High Density Foam Rollers (rounded edges) If a brush is required then any natural bristle brush would be recommended.

Læs mere

Off White YLK192 (193)

White YLK905 (905)

Off White YLK192 (193)