Ecco la nostra nuova generazione di sistemi di smalti premium con risultati di livello professionale in una finitura unica e facile da utilizzare.
Toplac Plus è la migliore finitura lucida della categoria con una protezione dai raggi UV di maggiore durata, facile da applicare con il rullo senza dover ritoccare con il pennello. Disponibile in un’ampia gamma di colori brillanti.
Visita il sito international-yachtpaint.com per vedere i colori disponibili per paese
Snow White
YLK000 (001)
Mediterranean White
YLK184 (545)
Matterhorn White
YLK198 (199)
Rescue Orange
YLK265 (265)
Oyster White
YLK194 (195)
Ivory
YLK187 (812)
Cream
YLK027 (027)
Fire Red
YLK504 (504)
Mauritius Blue
YLK904 (018)
Rustic Red
YLK501 (501)
Bondi Blue
YLK898 (016)
Lauderdale Blue
YLK936 (936)
Sapphire Blue
YLK830 (830)
Oxford Blue
YLK993 (105)
Flag Blue
YLK990 (992)
Platinum
YLK151 (151)
Atlantic Gray
YLK684 (289)
Jet Black
YKL999 (051)
Yellow
YLK101 (101)
Rochelle Red
YLK299 (011)
Bounty
YLK292 (350)
Donegal Green
YLK541 (077)
One UP
Primer due in uno e sottosmalto per finiture monocomponenti
Complessità del sistema ridotta per substrati in metallo
Apporta una finitura più liscia con maggiore protezione del substrato
Formulato per esaltare l’estetica di Toplac Plus
Sistema migliore della categoria con finiture monocomponenti International e pitture per coperte, su tutti i substrati
VOC ridotti
Facile da applicare con pennello e rullo, con distensione e livellamento eccellenti
Più facile da carteggiare rispetto a One UP, con riduzione del tempo tra una mano e l’altra
Scopri come miscelare One UP
Applicare su One UP, il nostro sottosmalto e primer monocomponente tutto in uno, con protezione del substrato, finitura extra liscia e VOC inferiori.
Toplac Plus
Finitura lucida per yatch premium a lunga durata
Finitura di qualità professionale
La nuova formula con migliore distensione elimina la necessità di rovesciamento quando si utilizza un rullo
Non necessita di carteggiatura tra le mani
Protezione UVB potenziata per brillantezza e ritenzione del colore
Eccellente livello di brillantezza
Scopri di più
Ottenere una finitura eccezionale non è mai stato così facile.
Got questions? Check out our FAQ's
Pre-Kote Plus FAQ's
Toplac Plus FAQ's
Scarica
Scarica
Scarica la brochure per maggiori informazioni su ciò che Toplac Plus e One UP possono fare per te.
Trova un rivenditore
acquistare ora
Serve aiuto? Contattaci.
yacht.italia@akzonobel.com
Colori disponibili
Seleziona un colore
One UP Viscosity and Mixing
1. All’apertura, il prodotto potrebbe apparire solido o viscoso.
2. Senza miscelarlo, il prodotto può essere capovolto senza che fuoriesca o scorra fuori dal barattolo.
3. One UP deve essere miscelato accuratamente per poter raggiungere la consistenza giusta.
4. Una volta ben miscelato, il prodotto deve scorrere o fluire dal barattolo. A questo punto è pronto all’uso.
Questions and answers
Can Pre-Kote Plus and Pre-Kote be physically mixed together?
No, they are not fully compatible with each other.
Can Pre-Kote Plus be applied over Pre-Kote if half-way through a job?
Yes.
Can Pre-Kote be applied over Pre-Kote Plus?
Yes, but not recommended as the full properties of Toplac Plus
may not be obtained.
Can Toplac be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Pre-Kote Plus be applied over Interprotect?
Yes.
I have previously used a primer in timber bilges without overcoating because it was fast dry and easy to apply. Could I use Pre-Kote Plus for the same type of job?
Yes, but use the Blue-Gray product.
Can Pre-Kote Plus be used on Clear Epoxies like West System, Hawk Epoxy, or System Three epoxies?
No, it cannot not be directly applied due to the amine in the epoxy. Recommend to use either Epoxy Primekote 404/414 or InterProtect 2000E over this substrate and then finish off with Pre-Kote Plus as the final primer prior to topcoat.
Would the White Pre-Kote Plus yellow if used in interior and not overcoated with gloss finish?
Most single part finishes tend to yellow in the dark but recover if exposed to light. For example, if used in dry bilge areas it would be wise to use the Blue-Gray Pre-Kote Plus as any yellowing would not be so noticeable.
Can I add other products/additives to Pre-Kote Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product. Pre Kote Plus can be sprayed with Special Thinner 216.
Questions and answers
Can Toplac Plus be applied over recently applied Brightside?
Yes, with light sanding with P400.
Can Brightside be mixed with Toplac Plus?
No. To avoid wasting any Brightside you might use it either as a first
coat before switching to Toplac Plus.
Can Toplac Plus be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Toplac Plus be applied over Pre-Kote?
Yes, but the enhanced gloss and DOI levels of Toplac Plus may not be fully obtained.
Is Toplac Plus suitable for use on decks with Intergrip added, or
will it be too slippery?
We would recommend the use of Interdeck for decks. Toplac Plus would present the same finish as Brightside with Intergrip added and both would have very similar levels of slip resistance. Actual levels of slip resistance would vary depending on the level of Intergrip added and how evenly it was applied.
Do Toplac Plus colors match the previous Brightside colors
where the color name are the same?
Toplac Plus is not an exact match to Brightside due the new raw
materials used in Toplac Plus, but as with any manufactured color you should always ensure you have the same batch number product to complete any given job. Using Brightside with Toplac Plus of the same
code/color side by side for example may well show a tonal difference that can be affected by very slight color differences andgloss levels. It is best to use any Brightside you have as a first coat, perhaps blended with Pre-Kote Plus and finish with Toplac Plus.
Can I add other products/additives to Toplac Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Flattening Agent for one part finishes can be used to create a variety of gloss, satin or matt effects.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product as they would have both. If sprayed Special Thinner 216 is recommended for Toplac Plus.
What equipment (roller/brush) should I use with Toplac Plus?
We recommend to use a fine, thermo-bonded foam roller. Suitable rollers are listed below:
4” High Density Foam Rollers (rounded edges)
6” Closed Cell Foam Rollers (flat edges, cut into 3” sections)
6” Ultra Smooth High Density Foam Rollers (rounded edges)
If a brush is required then any natural bristle brush would be recommended.
Scopri di più
Off White
YLK192 (193)
White
YLK905 (905)
White
YLK905 (905)
Off White
YLK192 (193)