Introducing our next generation, premium topside system with professional level results in an easy to use one part finish.
Toplac Plus provides a best in class high gloss finish with longer lasting UV protection that is easy to apply with exceptional roller application, without the need for tipping, available in a full range of vibrant colors.
Snow White
YLK000 (001)
Mediterranean White
YLK184 (545)
Matterhorn White
YLK198 (199)
Off White
YLK192 (193)
Oyster White
YLK194 (195)
Ivory
YLK187 (812)
Cream
YLK027 (027)
Sundown Buff
YLK237 (237)
Ice Blue
YLK904 (904)
Sea Foam
YLK256 (256)
Boston Whaler Blue
YLK962 (962)
Bondi Blue
YLK898 (016)
Lauderdale Blue
YLK936 (936)
Sapphire Blue
YLK830 (830)
Oxford Blue
YLK993 (105)
Flag Blue
YLK990 (992)
Platinum
YLK151 (151)
Atlantic Gray
YLK684 (289)
Anthracite Gray
YLK315 (315)
Jet Black
YKL999 (051)
Yellow
YLK101 (101)
Rochelle Red
YLK299 (011)
Bounty
YLK292 (350)
Donegal Green
YLK541 (077)
Pre-Kote Plus
Two-in-One Primer and Undercoat for One Part Finishes
Reduced system complexity for metal substrates
Delivers a smoother finish with added substrate protection
Formulated to enhance the aesthetic appearance of Toplac Plus
Best in class system with Interlux one-part finishes and deck paints, on all substrates
Lower VOCs
Easy to apply by brush or roller with excellent flow and leveling
Easier to sand than Pre-Kote reducing the amount of time required between coats
Find out more
Learn how to mix Pre-kote
Apply over Pre-Kote Plus, our improved one part undercoat and topside primer all in one, with substrate protection, an extra smooth finish, and lower VOCs.
Toplac Plus
Premium High Durability Yacht Gloss Finish
Professional Quality Finish
New formula with improved flow eliminates the need for tipping when using a roller
No sanding between coats
Improved distinction of image (DOI) and flow over Brightside
Enhanced UV protection for gloss and color retention
Exceptional gloss level
USA
An amazing finish has never been so easy.
Got questions? Check out our FAQ's
Pre-Kote Plus FAQ's
Toplac Plus FAQ's
Download
Download
Download the flyer to learn more about what Toplac Plus and Pre-Kote Plus can do for you?
Find a retailer
Canada
Still need help? Get in touch.
interluxtechnicalservice@akzonobel.com
Available colors
Select a color
Pre-Kote Plus Viscosity and Mixing
1. Upon opening, this product may look and feel soild or viscous.
2. Without mixing, the product can be turned upside down and will not flow or pour from the can.
3. Pre-Kote Plus must be mixed thoroughly in order to achieve the right consistency.
4. Once mixed thoroughly, the product should flow and pour from the can and is ready to use.
Questions and answers
Can Pre-Kote Plus and Pre-Kote be physically mixed together?
No, they are not fully compatible with each other.
Can Pre-Kote Plus be applied over Pre-Kote if half-way through a job?
Yes.
Can Pre-Kote be applied over Pre-Kote Plus?
Yes, but not recommended as the full properties of Toplac Plus
may not be obtained.
Can Toplac be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Pre-Kote Plus be applied over Interprotect?
Yes.
I have previously used a primer in timber bilges without overcoating because it was fast dry and easy to apply. Could I use Pre-Kote Plus for the same type of job?
Yes, but use the Blue-Gray product.
Can Pre-Kote Plus be used on Clear Epoxies like West System, Hawk Epoxy, or System Three epoxies?
No, it cannot not be directly applied due to the amine in the epoxy. Recommend to use either Epoxy Primekote 404/414 or InterProtect 2000E over this substrate and then finish off with Pre-Kote Plus as the final primer prior to topcoat.
Would the White Pre-Kote Plus yellow if used in interior and not overcoated with gloss finish?
Most single part finishes tend to yellow in the dark but recover if exposed to light. For example, if used in dry bilge areas it would be wise to use the Blue-Gray Pre-Kote Plus as any yellowing would not be so noticeable.
Can I add other products/additives to Pre-Kote Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product. Pre Kote Plus can be sprayed with Special Thinner 216.
Questions and answers
Can Toplac Plus be applied over recently applied Brightside?
Yes, with light sanding with P400.
Can Brightside be mixed with Toplac Plus?
No. To avoid wasting any Brightside you might use it either as a first
coat before switching to Toplac Plus.
Can Toplac Plus be blended with Pre-Kote Plus?
Yes, follow recommendations as for Toplac Plus.
Can Toplac Plus be applied over Pre-Kote?
Yes, but the enhanced gloss and DOI levels of Toplac Plus may not be fully obtained.
Is Toplac Plus suitable for use on decks with Intergrip added, or
will it be too slippery?
We would recommend the use of Interdeck for decks. Toplac Plus would present the same finish as Brightside with Intergrip added and both would have very similar levels of slip resistance. Actual levels of slip resistance would vary depending on the level of Intergrip added and how evenly it was applied.
Do Toplac Plus colors match the previous Brightside colors
where the color name are the same?
Toplac Plus is not an exact match to Brightside due the new raw
materials used in Toplac Plus, but as with any manufactured color you should always ensure you have the same batch number product to complete any given job. Using Brightside with Toplac Plus of the same
code/color side by side for example may well show a tonal difference that can be affected by very slight color differences andgloss levels. It is best to use any Brightside you have as a first coat, perhaps blended with Pre-Kote Plus and finish with Toplac Plus.
Can I add other products/additives to Toplac Plus?
No, you should never add any additives or materials that claim to improve specific properties of an AkzoNobel product unless it is specifically stated so on the technical data sheet or labels. Doing so would invalidate any claims for application or performance issues. Flattening Agent for one part finishes can be used to create a variety of gloss, satin or matt effects.
Can the product be sprayed?
We do not recommend that DIY users spray the product as it is unlikely that they would have the full correct PPE equipment and suitable ventilated application areas. Professionals may decide to spray apply the product as they would have both. If sprayed Special Thinner 216 is recommended for Toplac Plus.
What equipment (roller/brush) should I use with Toplac Plus?
We recommend to use a fine, thermo-bonded foam roller. Suitable rollers are listed below:
4” High Density Foam Rollers (rounded edges)
6” Closed Cell Foam Rollers (flat edges, cut into 3” sections)
6” Ultra Smooth High Density Foam Rollers (rounded edges)
If a brush is required then any natural bristle brush would be recommended.
USA
Canada
Find out more
USA
Canada