Put the SpeedFit 2.0 Design Simulator to the test
Using the SpeedFit 2.0 Design Simulator is simple. Start by selecting your application (DC to DC, AC to DC, or DC to AC). Depending on the selection you make, the simulator will guide you through a series of questions to generate a reliable simulation.
Next
Put the SpeedFit 2.0 Design Simulator to the test
Next, you will choose your power supply inputs. Based on your requirements, the simulator will provide you with a selection of matching circuits that may work for your design.
Next
Back
Put the SpeedFit 2.0 Design Simulator to the test
Next, the simulator will offer you recommendations for Wolfspeed products well-suited for your design.
You’ll choose from these selections, including diodes, MOSFETs, and modules, with the option to explore other configurations such as paralleling devices and other system component values.
Next
Back
Put the SpeedFit 2.0 Design Simulator to the test
Finally, select the thermal properties for your design’s cooling system, which enables the simulator to estimate how well your target cooling method will dissipate heat.
Next
Back
Put the SpeedFit 2.0 Design Simulator to the test
Now you’re ready to run your simulation. The SpeedFit 2.0 Design Simulator will take all of the factors you selected into consideration and output a variety of information to help you maximize the efficiency of your design. You’ll also have access to a summary that will put all the information at your fingertips, and it is easy to go back and tweak values and component selection to compare results and optimize your design.
Next
Back
Put the SpeedFit 2.0 Design Simulator to the test
SpeedFit’s Summary tab displays the system parameters, Wolfspeed device part numbers, and simulation results in one table. Designers can save and print the information and request samples directly from this page. If a variation was made and the simulation re-run, a similar but separate table is generated for the variation so that designers can easily compare the results.
Back