construction
Refining process
wind ceros header
We know that protecting a worker is anything but a breeze. But after a hundred years in the business, we tend to make it feel that way. In fact, we use all our experience and engineering know-how to make protective equipment that’s safe, comfortable and easy to wear. That’s especially important when you are nearly 100 metres in the air.
Exploration & developing
Drill & blast
Load & haul
Stockpile & load out
Access & haulage tunnels
Production
Drilling
Charging
maintenance
we make safety
After a hundred years in this business, it’s safe to say we’re innovators in PPE that protects workers from head to toe. We just dig protecting people, especially miners. We make their protective equipment comfortable to wear even in some dangerous, unwieldy environments.
MAINTENANCE
CONSTRUCTION
a breeze
home
Tower Foundation
Tower Construction
Blade Installation
Tower (Confined Space)
Tower Maintenance
Blade Repair
Nacelle Improvements
Hub Renovations
Blades (Confined Space)
Nacelle (Electrical Hazards)
Hub (Confined Space)
From base to blades, wind energy workers are exposed to severe hazards as they construct powerful wind turbines. Sharp edges, extreme heights, tight spaces and high-voltage equipment mean workers must be outfitted in head-to-toe PPE to stay safe — and stay efficient — while building sustainable, critical structures.
home /
tower foundation
tower construction
blade installation
above neck
hand
fall
above the neck ppe gear
Lorem ipsum dolor sit amet. Ea reiciendis fugiat sed ipsum modi magni laboriosam ex numquam veniam.
learn more >
product 5
hand ppe gear
respiratory ppe
impact and cut
home / construction /
footwear
A strong, weather-agnostic foundation is needed to support wind turbines during assembly and use. Wind energy workers operate heavy excavation equipment, cranes and concrete mixers to build this base, meaning they must wear PPE that can help prevent potential falls, shocks and debris.
product 01
view series >
product 02
product 03
product 04
- footwear PPE
- fall PPE
- hand PPE
- above neck PPE
Liquid-resistant, reinforced leather helps provide traction and protection against impact and slippage
Oliver 65 Series 10” Lace-Up Steel Toe
agile
Move freely and stay secure with this ergonomic, customisable full-body harness that helps keep workers safe while at heights
Miller® h700 full body Harness
Lightweight and high strength, this PPE for low-space clearances can help absorb shocks from potential falls
Miller® TurboLite Personal Fall Limiter
With impact-resistant nylon housing and corrosion-resistant stainless steel, this durable harness helps provide fall protection
Miller® Falcon+
Handle materials with gloves that help enhance grip, protect from impacts and still allow wearers to operate with dexterity
Rig Dog®
Stand up to sharp edges and fragments seen in wind turbine construction with comfortable, cut-resistant CoreShield gloves
CoreShield™
These adjustable, cushioned earmuffs can be worn with hard hats and face shields, and offer optimal noise attenuation in loud areas
VeriShield™
Wear these disposable earplugs when operating loud construction equipment, especially in tight spaces where sound can’t escape
Laser Lite®
These contoured, single-use earplugs are designed to ensure superior noise-blocking performance in loud construction environments
MAXIMUM
watch video >
Experience comfort and efficiency in one mask with double adjustable straps and highly effective filtration
5000 Series Respirator
Help protect against slippage, shocks and static during wind energy work with this high-quality safety footwear
Otter Premium Guard Mid Cut
Shock-absorbing, work-positioning and arc-flash lanyards are available for many harnesses to help limit falls and their effects
fall protection lanyards
Help prevent falls as critical turbine equipment is loaded and unloaded from the top of a trailer
COMBISAFE® Loading System MkII
construction: tower construction
As they lift, weld and bolt tower sections into place, wind energy workers operate inside and are suspended outside the tower. PPE can help protect them from falling objects, burns, shocks, falls and poor air quality as they connect electrical wiring and fit sections together.
hands
Oliver 65 Series 10" Lace-Up Steel Toe
Help wind energy workers withstand impact, slippage and compression hazards with this breathable, protective footwear
Agile runner
Rig Dog®:
These antistatic, disposable gloves help combine comfort and protection from debris when worn in construction applications
Dermatril® P
With an anti-fog coating, these adjustable glasses can help deflect construction debris in varying weather conditions
Avatar™ HydroShield:
A secure fit and reduced facepiece slippage come standard with this lightweight, protective, disposable respirator
N2000 Series Half Mask
Help absorb impacts and deflect debris, wind and dust with this safety helmet that doubles as secondary eye protection
Fibre Metal Safety Helmet
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore.
impact in-ear
Fall Protection Lanyards
This work-positioning lanyard can be attached to harnesses and adjusted quickly for safer, more effective, hands-free work
Miller® HandZup®:
Miller® H700 Full Body Harness
Help protect tower construction workers from falls with this industry-proven fall arrester and its permanent locking system
RopeGrab 500:
Ballast Fitgo:
Keep hands free when climbing fixed turbine ladders with this continuous, vertical lifeline system
Söll Vi-Go Vertical Cable System
Help improve mobility and hands-free safety with this durable, shock-absorbing fall protection system for multiple workers
Söll GlideLoc Vertical Rail System
avatar™ hydroshield
Fitting sharp, heavy blades to the hub of the nacelle requires precise execution – and PPE. Alongside cranes, wind energy workers who handle blades at great heights can experience rigging failures, high-speed winds, crush injuries or electric shock.
construction: blade installation
avatar™ hydroshield:
Help keep wind energy workers' eyes protected against abrasions, airborne particulates, potential impacts and heavy winds
a800 safety glasses
Help workers at height breathe easier with comfortable devices that remove unwanted contaminants from the air
Powered Air Purifying Respirators
pa900 >
This personal fall limiter for edge applications features a webbing lifeline with chemical, abrasion and cut resistance
Miller® TurboLite™ Edge
Söll Vi-Go Vertical Cable System:
Quickly access critical tools for injured wind energy workers with this wearable solution and fall protection
Miller™ Rescue Kit:
verishield
rescue equipment
Perform technical rescues with this body splint and its vertical lowering and raising capabilities, even in confined spaces
Body EVAC Splint/Miller™ Rescue and Evacuation Equipment:
This automatic controlled-descent device should be used to help increase the safety of emergency rescue situations at height
Miller SafEscape™ ELITE
- rescue equipment ppe
Reach and transport injured workers with stability and care using this full body splint that can be vertically lowered and raised
Miller EVAC Body Splint Kit
Söll GlideLoc Vertical Rail System:
pa700 >
Use these supportive, grip-enhancing, cut-resistant gloves when handling construction equipment and sharp tools
Flextril™
With an anti-fog coating, these adjustable glasses can help deflect maintenance debris in varying weather conditions
In the event of general maintenance or emergency repairs, wind energy workers wrestle with accessibility challenges and dangerous weather conditions alongside fall-, electrocution- and failure-related risks. PPE can help keep maintenance workers safe as they work quickly and skilfully to ensure the consistent functionality of wind turbines.
hub renovations
blade repair
nacelle
tower maintenance
nacelle improvements
Lorem ipsum dolor sit amet. Ea reiciendis fugiat sed ipsum modi magni laboriosam ex numquam veniam iusto galisum hic dolorem dolorum est minus voluptatem. Cem cupiditate eligendi rem facere minima et dolor necessitatibus.
maintenance: tower maintenance
Wind energy workers who make repairs or new installations in the small, confined spaces inside the tower need to wear PPE to help reduce the risk of falls, electrocution, abrasions or becoming trapped.
home / maintenance /
Even in harsh maintenance environments, this fall protection can withstand corrosion, contaminants and multiple falls
Miller® DuraSeal™ Self-Retracting Lifeline
Agile Runner:
Wear these disposable earplugs when operating loud maintenance tools, especially in tight spaces where sound can’t escape
These contoured, single-use earplugs are designed to ensure superior noise-blocking performance in loud maintenance environments
Stand up to sharp edges and fragments seen in wind turbine maintenance with comfortable, cut-resistant CoreShield gloves
CoreShield™:
Find your perfect, protective fit with safe and comfortable shoe options that resist temperatures, cuts, slippage and abrasions
Otter Premium Family
maintenance: hub renovations
hub
Updates to the hub of a wind turbine are critical. So are the conditions in which wind energy workers must perform these renovations. Tight spaces, live wires, proximity to heavy blades and equipment malfunction can be extremely hazardous at great heights, necessitating PPE.
avatar hydroshield:
Help keep wind energy workers’ eyes protected against abrasions, airborne particulates, potential impacts and heavy winds
These antistatic, disposable gloves help combine comfort and protection from debris when worn in maintenance applications
Use these supportive, grip-enhancing, cut-resistant gloves when handling maintenance equipment and sharp tools
This harness moves with wind energy workers to help improve their security and limit falls during turbine maintenance
Miller® H500 Harness Industry Standard:
fall protection lanyards:
COMBISAFE® Loading System MkII:
Miller® HandZup®
maintenance: blade repair
blades
In varying wind speeds and weather conditions, wind energy workers must be secure as they access and repair blades nearly 100 metres in the air. Even straightforward maintenance to surface or internal blade components puts these workers at risk of dangerous falls, cuts, electrocution, etc.
Miller® H500 Harness Industry Standard
Help protect tower maintenance workers from falls with this industry-proven fall arrester and its permanent locking system
maintenance: nacelle improvements
Make improvements to the heart of wind turbines with proper, head-to-toe PPE solutions. In the nacelle, wind energy workers must be secured to limit fall risks and protected from mechanical hazards like electric shocks and arc flash.
- clothing PPE
Wear these leather protectors to help prevent damage to rubber electrical gloves and keep workers safe from electric hazards
ILP Series:
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Electro KCL Gloves
Help reduce fall arrest impacts and incidental electric shocks in the nacelle with this shock-absorbing lanyard
Miller™ ArcFlash Lanyard:
This compact, easy-to-use PPE can lock into place on a vertical lifeline system for continuous fall protection
Miller™ Manual Rope Grab:
Wear these comfortable, high-tech, insulating earmuffs for greater protection in loud areas with electrical hazards
VeriShield™ 100 Dielectric
Help limit shocks, burns and contact with dangerous levels of heat energy with garments designed to protect against arc flash
Pro-Wear® Plus
Extended-chin and top-of-head protection come with this PPE that helps provides visibility, compatibility and comfort too
Bionic Face Shield
clothing
Help shield wind energy workers’ faces from arc flash and other electrical hazards while performing maintenance in the nacelle
PrismShield™ Plus:
Laser Lite®:
This glove-to-shoulder PPE solution helps workers avoid accidental contact with energised conductors and equipment
Rubber Insulating Dipped Sleeves:
VeriShield™ 100 Dielectric:
Pro-Wear® Plus:
Miller® h700 full body Harness:
Miller® TurboLite Personal Fall Limiter:
Miller® Falcon+:
