HONEYWELL MICRO SWITCH LIMIT SWITCH SELECTION
Environmental Requirements
Hazardous Environment
Non-Hazardous Environment
APPLICATION Requirements
Sealing - Yes
Sealing - No
Heavy-Duty Switch
Medium-Duty or General-Purpose Switch
Compact Precision Switch
Global Safety
MICRO SWITCH HDLS (Standard) Series
MICRO SWITCH HDLS SS (Stainless Steel) Series
MICRO SWITCH HDLS FP (Fully Potted) Series
Size
Full Size
Miniature
Type
Premium
Standard
Premium Operating Characteristics
MICRO SWITCH 914CE Series
MICRO SWITCH BZE6 Series
MICRO SWITCH SZL-VL Series
MICRO SWITCH NGC Series
MICRO SWITCH SZL-WL Series
MICRO SWITCH 1LS Series
MICRO SWITCH EX Series
APPLICATION Type
Cable Pull
Limit Switch
Valve Position Indicator
Safety
Safety/ATEX only
MICRO SWITCH CLSX Series
MICRO SWITCH LSX Series
MICRO SWITCH BX Series
MICRO SWITCH BX2 Series
MICRO SWITCH VPX Series
MICRO SWITCH CX Series
MICRO SWITCH GSX Series
MICRO SWITCH GXA Series
MICRO SWITCH GXC/D/E Series
type
Global
DIN EN50041
Min-Din EN50047
MIN-DIN EN50047
MICRO SWITCH GLA Series
MICRO SWITCH GSA Series
MOUNTING
mOUNTING
MICRO SWITCH GLE Series
MICRO SWITCH GLD Series
MICRO SWITCH GLC Series
MICRO SWITCH GLL Series
ACTUATION
Mechanical Operated
Key Operated
Non-Contact
MICRO SWITCH 924CE Series
MICRO SWITCH GK Series
MICRO SWITCH GKE Series
MICRO SWITCH GKM Series
MICRO SWITCH GKN Series
MICRO SWITCH FF Series
MICRO SWITCH CPS Series
MICRO SWITCH 2CCP Series
UL, CSA approvals Cable lengths may be 200 ft in straight line Positive opening of normally closed (NC) contacts For use with conveyors, perimeter guarding and more
MICRO SWITCH CLSX Series Cable-Pull Switch
LEARN MORE
UL, CSA approvals Silver contacts available for switching power loads and gold contacts for switching low-power loads Mounting pattern is interchangeable with the iconic HDLS MICRO SWITCH platform Optional availability for use in low temperatures (-40°C [-40°F]) Multiple actuator & switching combinations are available
MICRO SWITCH LSX Series Hazardous Area Limit Switch
ATEX, IEC Ex, NEPSI, InMETRO, KCC, cULus approvals Choice of aluminum or stainless steel housings for use in non-corrosive and corrosive environments Designed for use in the toughest climates (-40°C to 70°C [-40°F to 158°F]) Silver contacts available for switching power loads and gold contacts for switching low-power loads Mounting pattern is interchangeable with the iconic HDLS MICRO SWITCH platform Multiple actuator & switching combinations are available
MICRO SWITCH BX Series Hazardous Area Limit Switch
MICRO SWITCH BX2 Series Hazardous Area Limit Switch
MICRO SWITCH VPX Series Valve Position Indicator
ATEX, IEC Ex, NEPSI, KCC, cULus approvals Die-cast aluminum housing and various sealing (NEMA 4, 4X, 6, and 13), certifies the VPX Series is rated for rain, wind, snow, ice and blowing dust environments Wide operating temperature range from -40°C to 80°C Well suited for up to 500,000 actuation cycles Available in multiple indicator colors that is visible from all directions
MICRO SWITCH CX Series Hazardous Area Limit Switch
ATEX, IEC Ex, InMETRO, UL, CSA approvals Ability to monitor quarter-turn and linear valve position Automates existing, non-automated valves Pin plunger and side-rotary versions Hermetically sealed elements available Housing available in short and standard lengths Optional gold contacts for switching low-power load Up to six NC and six NO contacts
MICRO SWITCH EX Series Hazardous Area Limit Switch
ATEX (CE), IEC Ex, UL, CSA approvals Smallest UL-listed, power-load carrying switch available for use in hazardous locations Ample wiring space that eases installation time Four-sided mounting with optional mounting bracket Dual conduit openings on select models Switching capacity from 1 A for low energy loads, up to 20 A for most industrial electrical loads
MICRO SWITCH GSX Series Safety Limit Switch for Hazardous Areas
ATEX, IEC Ex, InMETRO, KOSHA, SIL3, UKCA, CE, cULus approvals Up to four normally closed (NC) contacts per switch or a combination of NC and normally open (NO) contacts per limit switch NC contacts are positive opening for positive mode monitoring of gates NO contacts available for signal circuits or negative mode monitoring of gates Choice of actuator head types: top pin plunger, top roller plunger, top roller lever, or side rotary
MICRO SWITCH GXA Series Flame-Proof Limit Switches
II 2 G Ex db IIC T6 Gb II 2 D Ex tb IIIC T85°C Db KEMA 00 ATEX 2103 X IEC Ex KEM 10.0039X Conforms to EN IEC 60079-0, EN 60079-1 and EN 60079-31 CE marked EN50041 mounting compatible Rugged zinc die-cast housing with epoxy coating Pre-wired, 5 m of cable
MICRO SWITCH GXC/D/E Series Flame-Proof Limit Switches
II 2 G Ex db IIC T6 Gb II 2 D Ex tb IIIC T85°C Db KEMA 00 ATEX 2103 X IEC Ex KEM 10.0039X Conforms to EN IEC 60079-0, EN 60079-1 and EN 60079-31 CE marked EN50047 mounting compatible Rugged zinc die-cast housing with epoxy coating Pre-wired, 5 m of cable
MICRO SWITCH HDLS (LSA) Series Heavy-Duty Limit Switches
CE, UKCA, CCC, CSA UL approvals Designed to IP65/66/67 and NEMA 1, 3, 3R, 4, 4X, 6, 6P, 12 (without cable), and 13 for demanding applications Diaphragm seal between head and body provides an extra measure of protection Multiple connectivity options for international applications Configurable product platform for design versatility Large, existing installation base and channel allows for quick delivery worldwide
MICRO SWITCH HDLS (LS2) Series Stainless Steel Heavy-Duty Limit Switches
MICRO SWITCH HDLS (LS-FP) Series Fully-Potted Heavy-Duty Limit Switches
MICRO SWITCH SZL-WL Series Compact Limit Switches
CE, UKCA, CSA, UL approvals Two circuit double break contacts Small size and universal mounting footprint IP67 sealing Wide variety of actuator heads and assortment of actuators Mechanical service life of up to 10,000,000 operations
MICRO SWITCH 1LS Series Compact Limit Switch
US: select listings CSA & UL approvals EU: CE, UKCA One switch can control two circuits Small size and universal mounting footprint US: NEMA 1, 3, 4, 6, & 13 EU: IP67, NEMA 1, 4, & 13 Rugged die-cast metal construction with a wide variety of heads and actuators
MICRO SWITCH SZL-VL-S Series Miniature Limit Switches
CE, UKCA, cULus, CCC approvals Sealed to IP67, NEMA 1, 12, 13 Snap-action contacts Die-cast metal housing with glass filled, flame-retardant thermoplastic cover Stainless steel levers with either steel and nylon rollers Variety of actuators Positive-opening contacts (side rotary version only)
MICRO SWITCH NGC Series Miniature Limit Switches
CE, UKCA, CCC, cULus approvals Can be configured more than 380,000 ways SPDT or DPDT configurable circuitry Snap-action, positive-break contacts Silver alloy and gold-plated contact options Conforms to IEC 60947-5-1, IEC 61373, EN45545-2 (metal variants with M12 connectors only) NEMA 1, 4, 12, 13; IP67 sealing Metal and plastic housing options Low and high temperature variants Cable and connector terminations
MICRO SWITCH 914CE Series Miniature Precision Limit Switches
CE, UKCA, cURus approvals NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13, and IP66/67/68 environmental sealing Pre-leaded (UL cable) or supplied with a M12 four-pin connector Wide selection of actuators and cable length variations with side and bottom exit cable/connector options 25 mm mounting centers engineered with a MICRO SWITCH SM switch for consistent, precise actuation Well suited for up to 10 million actuation cycles (Up to 5 million actuation cycles for wobble actuators)
MICRO SWITCH BZE6 Series Compact Precision Limit Switches
CE, UKCA, CSA, UL approvals Electrostatic epoxy coated zinc housing for durability in most indoor and outdoor environments Designed with MICRO SWITCH BZ, BM, or DT basic switches to deliver precise switching of electrical and mechanical operating characteristics High capacity (22 A) available Small footprint with easy access to wiring terminals Available in a configuration suited to the application with variety of actuators, circuitries, connectivities, and mounting options
MICRO SWITCH GSA Series Global Safety Limit Switches
UL, CSA, CE, UKCA, SIL3 approvals Epoxy-coated, metal zinc housing Mounting to EN50041 Choice of actuator head types and levers Wide selection NC and NO contact options Up to four electrically independent contacts for control and monitoring Gold contacts available
MICRO SWITCH GLA Series Global Limit Switches
CE, UKCA, CCC, CSA, UL, Designed to EN50041 standard, 30 mm × 60 mm mounting Available as a standard body or plug-in body with same footprint Wide range of actuator heads and levers Sealed to IP67 and NEMA 1, 4, 12, and 13
MICRO SWITCH GLC Series Global Limit Switches
CE, UKCA, CCC, CSA, UL, Designed to EN50047 standard Metal housing or double-insulated plastic housing Wide range of actuator heads and levers Heads can be positioned at 90° increments Sealing: IP66, NEMA 1, 4, 12, and 13
MICRO SWITCH GLD Series Global Limit Switches
CE, UKCA, CCC, CSA, UL, Designed to EN50047 standard Metal housing or double-insulated plastic housing Wide range of actuator heads and levers Heads can be positioned at 90° increments Sealing: IP66/67, NEMA 1, 4X (indoor use only), 12, and 13
MICRO SWITCH GLE Series Global Limit Switches
CE, UKCA, CCC, CSA, UL, IEC/EN 60947-5-1 approvals Designed to EN50047 standard Metal housing or double-insulated plastic housing Wide range of actuator heads and levers Heads can be positioned at 90° increments Sealing: IP66, NEMA 1, 4, 12, and 13
MICRO SWITCH GLL Series Global Limit Switches
CE, CCC, cULus, CSA approvals Designed to EN50047 standard Double-insulated plastic housing Integral threaded conduit of 0.5 NPT or 20 mm Positive opening normally closed contacts to IEC 60947-5-1-3 Double break snap action or slow action contacts IP66, NEMA 1, 12, & 13
MICRO SWITCH 924CE Series Miniature Safety Limit Switches
UL, UKCA, CE, SIL3 approvals Compact metal housing epoxy encapsulated with the common 25,4 mm [1.0 in] center-to-center mounting Positive opening operation of normally closed contacts to EN/IEC 609475-1-3 specification Three different slow-action circuit options: 1NC/1NO BBM, 1NC/1NO, and 1NC Wide range of actuator heads and levers Can be gang mounted for multiple-pole capability
MICRO SWITCH GK Series Key-Operated Safety Limit Switches
UL, CSA, UKCA, CE, SIL3 approvals Electrostatic epoxy coated die-cast zinc housing with the EN50041 30 mm × 60 mm mounting Four different types of stainless steel keys 1NC/1NO, 2NC, 2NC/1NO, 2NC/2NO, 3NC/1NO, 4NC contacts Positive opening operation of normally closed contacts to EN/IEC 60947-5-1-3 specification Unique friction feature design for key retention Dual entry head design (side or top entry) for key; up to eight different key entry positions
MICRO SWITCH GKE Series Key-Operated Safety Limit Switches
cULus, UKCA, CE, CCC, SIL3 approvals 20 mm to 22 mm mounting centers per EN50047 which accept M4 or #8 mounting hardware Different contact options; 1NC (normally closed) and 1NO (normally open) or 2NC All NC contacts are positive opening EN/IEC 60947-5-1-3 specification Actuator head can be indexed in any of four positions, in 90° increments IP66/IP67; NEMA 1, 4X (indoor), 12, & 13
MICRO SWITCH GKM Series Key-Operated Safety Limit Switches
UL, cUL, UKCA, CE, SIL3 approvals Common 22 mm mounting centers which accept M4 or #8 mounting hardware Prewired cable or M12 connector for electrical termination Positive opening action of normally closed contacts to EN/IEC 60947-5-1-3 specification
MICRO SWITCH GKN Series Key-Operated Safety Limit Switches
cULus, UKCA, CE, CCC, SIL3 approvals Four different styles of stainless steel actuator keys Three conduits with 0.5-14 NPT or M20 thread connection Positive opening action of normally closed contacts to EN/IEC 609475-1-3 specification Three contacts: 2NC/1NO or 3NC IP67; NEMA 1, 4X (indoor), 12, and 13
Honeywell FF Series Non-Contact Safety Switches
Approvals vary by series Non-contact switch designed to be tamper-proof, stand-alone safety switch Magnetically actuated ABS or stainless steel housings Pre-wired or Male M12 connectors Various contact options
MICRO SWITCH CPS Series Cable-Pull Safety Switches
UL, CSA, CE, UKCA, SIL3 approvals Direct opening action of NC contacts 2CPS: 2NO/2NC, 1NO/3NC, or 4NC contacts 1CPS: 1NO/1NC, 2NO/2NC, 1NO/3NC, or 4NC contacts Typical cable span of 76 m [250 ft] in an environment with a temperature change of ±17°C [±30°F]. Longer spans are possible depending upon temperature change and installation Large wiring cavity with straight-through wiring
MICRO SWITCH 2CCP Series Cable-Pull Safety Switches
UL, cUL, CE, UKCA, SIL3 approvals Dual direction Improved design for LED and tension windows Updated design to easily and economically replace the faceplate All options in one package size Dual, left, or right actuation E-Stop and re-start button options
