THE BEST IN MOLD
RESISTANT COATINGS
JUST GOT BETTER.
NEW AND IMPROVED FORMULATION
IAQ 6000 MOLD RESISTANT COATING
IAQ 6000 is a white, tintable and durable vinyl acrylic water-based coating for professional use formulated with a sustainable fungistatic agent to resist mold growth on a coating surface. IAQ 6000 has been tested by independent laboratories and passed both ASTM G21 and D3273 mold resistant testing with the highest ratings possible.
THE IAQ 6000 DIFFERENCE
IAQ 6000 ensures the job is done right the
first time with one coat coverage, eliminating the
need for call backs and securing your reputation.
MOLD RESISTANCE
DRAWDOWN TEST - HIDE
COVERAGE
ANTI-MICROBIAL TEST ASTM D3273
AT 4 WEEKS
IAQ 6000
VS.
COMPETITOR
FUNGAL
GROWTH*
Click below to see the difference!
ONE COAT COVERAGE
TIME & LABOR SAVINGS
IAQ 6000
COMPETITOR
COAT 1
LABOR
COATING
COST
$0.50/SQ.FT.
$0.50/SQ.FT.
$0.26/SQ.FT.
$0.17/SQ.FT.
$0.76/SQ.FT.
$0.67/SQ.FT.
COAT 2
LABOR
COATING
COST
N/A
N/A
N/A
$0.67/SQ.FT.
$0.17/SQ.FT.
$0.50/SQ.FT.
FULL COVERAGE
ACHIEVED IN COAT 1
TOTAL COST
FOR COVERAGE
$0.76/SQ.FT.
$1.34/SQ.FT.
IAQ 6000 SAVINGS: 43% / SQ.FT.
by choosing a product with full coverage and superior performance the first coat
INDUSTRY LEADER
IN RESTORATION PRODUCTS
ICP Building Solutions Group (BSG), a global leader in high-performance professional products, offers its trusted Benefect and Fiberlock brands through the Environmental Restoration Group, to deliver restoration and remediation professionals comprehensive solutions. With over 35+ years of experience, ICP’s Environmental Restoration Group offers an advanced suite of both conventional and botanical restoration products to address a full spectrum of environmental health and safety challenges.
PROJECT PROFILES
PARROT KEY RESORT
FLORIDA
TYNDALL AIR FORCE BASE
FLORIDA
WAREHOUSES
NEVADA
ADDITIONAL PRODUCTS
IN A FULL LINE OF MOLD RESISTANT COATINGS
AFTERSHOCK
EPA REGISTERED
FUNGICIDAL COATING
MOLD RESISTANT COATING
CLEAR
IAQ 6100
MOLD RESISTANT SEALANT
IAQ 6040
MOLD RESISTANT MASONRY
WATERPROOFER
IAQ 9000
CLICK ON A COATING TO LEARN MORE.
Now made up of a sustainable, active ingredient
One-coat application with high coverage & market-leading hide performance
Improved spray application with wider
range of application temperatures
New and improved formulation has
ultra-low VOCs, and low odor, making
it applicator and occupant friendly
Highly reflective which can be key in certain environments particularly where light is essential to growing healthy plants.
*Reflects 80% of the photons rcd back to the surrounding environment.
MOLD RESISTANCE
DRAWDOWN TEST - HIDE
COVERAGE
IAQ 6000
COMPETITOR
VS.
DRAWDOWN TEST - HIDE
IAQ 6000
COMPETITOR
VS.
ONE COAT APPLICATION
1 COAT
2 COATS
1 COAT
2 COATS
Click on the project to learn more!
PARROT KEY RESORT
FLORIDA
PARROT KEY RESORT
KEY WEST, FLORIDA
Hurricane Irma (Cat 4) made landfall 30 miles east of Key West on September 10, 2017 with sustained winds of 130+ MPH. As a result, there was significant structural and water damage to many of the resort properties in the lower Keys, including Key West. Parrot Key Resort received enough damage to their property that the owners decided to rebuild and renovate the entire property after the storm. After a complete disinfection of all salvageable building materials and replacement of others, Rolyn Companies encapsulated all interior building materials with IAQ 6000 White Mold Resistant Coating, a proven, professional choice to ensure that there would be no regrowth in the future.
• Specified coating needed to conform to all ASTM Mold Resistance
requirements
• Coating needed to provide a 10 year mold resistant warranty for the property
owners
• Product used needed to be cost effective and reliable (millions of $ lost during
restoration work & closing)
TYNDALL AIR FORCE BASE
FLORIDA
TYNDALL AIR FORCE BASE
FLORIDA
In October of 2018, Hurricane Michael (Cat 5) made landfall in the Panama City/Mexico Beach Gulf Coast areas of FL. With sustained winds in excess of 155 MPH, it ravaged this area with tremendous wind destruction and flooding. Tyndall AFB was hit very hard and remained closed for many months. This base had in excess of 550 residential housing units on its property which sustained so much damage that all of the residents had to be relocated to other housing. Balfour Beatty Communities was tasked to remove all building materials which were deemed unsalvageable down to the wood framework, HVAC systems and interior drywall and remediate all mold growth on the framework prior to rebuilding the interiors. The work started in June 2019 and is ongoing.n, professional choice to ensure that there would be no regrowth in the future.
• Wood framing had to be cleaned with IAQ APC and disinfected with ShockWave
concentrate prior to coating.
• Specific coatings for prevailing moisture content- IAQ 6040 (18%-25%) &
AfterShock (below 17%).
• Products needed to be cost effective and reliable on this 2+ year mold
remediation project
WAREHOUSES
NEVADA
WAREHOUSES
RENO, NEVADA
More than a million sq ft of warehouse space was constructed in Reno, NV with defects, causing leaks in the roof build. The air infiltration and moisture from the penetrations resulted in mold growth under the OSB wood roof and above the insulation. While mold growth isn’t typically associated with typical dry Nevada weather, air handling systems and airflow must be constantly balanced optimally in order to prevent surface water activity. Airflow in a warehouse can be unpredictable with doors opening and closing often, inevitably causing the HVAC system to try to keep up. Condensation, even when you can’t see it, will accumulate and spores will colonize causing mold growth. Because some of these warehouse units have sensitive clients, such as high value electronics or produce, it was pertinent that this was remediated. All Eagle and Interstate Restoration determined the repair and restoration would take place by removing the insulation, cleaning the surface with Advance Peroxide Cleaner, disinfecting/sanitizing the surface with Shockwave to kill the bacteria and other microbial organisms and protecting the investment and repair work by preventing the regrowth of mold by coating the OSB wood with IAQ 6000. Now that the roof leakage has been fixed, the OSB will no longer be a condensing surface, eliminating the moisture trap.
AFTERSHOCK
AfterShock is a white, EPA registered, antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning/disinfecting contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface in residential and institutional buildings. This extremely durable, easy to apply, 100% acrylic sealant offers the ultimate combination of durability, application ease and fungal-resistance to address mold growth in nearly any situation.
• EPA-registered fungicidal coating
• Kills and prevents mold and mildew
• 100% acrylic sealant
IAQ 6100 is a mold resistant coating that goes on white for visibility and dries clear. It’s for professional use, and contains a fungistatic agent to resist mold growth on the dry coating surface. IAQ 6100 is a durable, flexible, and permeable 100% acrylic water-based coating. IAQ 6100 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal, and galvanized metal.
• Tested by independent laboratories for mold resistance:
ASTMG-21 and ASTM D-3273
IAQ 6100
•Mold resistant (on the dry coating surface)
•100% acrylic
• 100% acrylic, water-based coating
• Highly permeable
• Violet color for easy visibility
• Class A fire rated
IAQ 6040 is a sealant applied to wood, OSB, wallboard, concrete and other new construction materials to prevent and resist mold growth on the dry coating surface. The low-viscosity formula is easy to apply and provides a translucent finish that will not block the appearance of coated building materials.
IAQ 6040
• Holds back 10 psi of water pressure
• Resists mold growth*
• Latex based formulation
• Tintable
Stop up to 10 psi of water pressure (greater than a wall of water 22 feet high) from penetrating through interior and exterior surfaces with IAQ 9000 waterproofing coating. It’s specially formulated to stop water from above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements and foundations. The fast-drying formula can be applied with a brush and/or roller on dry surfaces and cleans up easily with soap and water.
IAQ 9000
GO BACK TO THE TOP.
CONTACT US
Simply fill out the form and we will get back to you soon!
*FUNGAL GROWTH ON OSB SUBSTRATE
Each product was applied with a 6 mil draw down bar
yielding a film thickness of ~3 dry mils
For more information on the Lubrizol Approved Product Program click here.
*Fiberlock Aftershock is a Lubrizol Approved Product.
*Fiberlock IAQ 6000 & 6001 are under review for the Lubrizol Approved Product Program.