Share this article
Find out more
Lorem tore veri tatis et quasi archi te cto heys esbe.
Step 1. Understand What Type of DVD You Are Holding
December 12th, 2018
by Estrella H.
One reason to rip DVDs is that gigabytes or terabytes of optical data can be shifted from physical discs to hard drive for easier access on multi-platforms, for example storing on NAS and then playing on computer or big screen TV without a DVD drive. While it sounds easy, there are three steps you need to go through one by one.
Too many DVDs lying around? Need a way to turn them digital? You can turn them into digital files with the right software. These three programs will get you started.
How to Rip DVDs and Play Them on Your Computer/TV
With homemade DVDs – discs recorded and burned by yourselves or your friends – there’s no encryption at all. But commercial DVDs – nearly all discs you purchased online or offline, domestically or abroad – are protected commercial copies, no matter whether they contain a movie, music or a yoga class. The newer the DVD is, the stronger the copy protection might be and the harder the DVD rip will be.
To rip a DVD, you need a tool, namely DVD ripping software. But which one best suits your needs? It depends. Almost all DVD rippers can rip homemade discs. Some deal with encrypted ones, but only a few support strictly copy-protected new DVDs. If it has to be free, there is only one name that comes to mind – WinX DVD Ripper. Let's see how DVD ripper software stacks up against each other, WinX DVD Ripper vs. Freemake vs. HandBrake.
Step 2. Single Out the Best Among All Paid/Free DVD Rippers
WinX DVD Ripper provides strong support for ISO image, VIDEO_TS folder and any type of DVD, be it region coded, copy protected or even scratched and damaged. Meanwhile, Freemake accepts homemade discs only and HandBrake acts up any time you load an encrypted DVD. Then there are output options. 210+ video audio codecs and 350+ device profiles are embedded in WinX DVD Ripper for you to freely choose. 1:1 DVD to ISO/MPEG-2 is available, as well, for the option to burn. Note that HandBrake transforms all data into either MP4 or MKV.
WinX DVD Ripper Is Far Ahead at No. 1 in Both Input and Output Aspects
[Spoiler] Taken together, WinX DVD Ripper wins out in every aspect of the comparison.
Without acceleration, ripping a feature-length (2-2.5 hours) movie DVD may take you 40 to 70 minutes. That’s not too bad if you just need to rip one disc. But for piles or hundreds of DVDs, hardware acceleration will save you and your computer from going crazy. Yep, fast ripping speed is largely due to the power of GPU. Intel QSV is allowed in HandBrake for H.264 encoding. Freemake uses Nvidia CUDA. WinX DVD Ripper is the only one that enables level-3 full hardware acceleration powered by Intel/Nvidia/AMD. Our test result tells that ripping a 2.5-hour commercial movie DVD with WinX DVD Ripper can be finished within only 5-10 minutes. Amazingly fast!
Level-3 Hardware Accelerated WinX DVD Ripper Delivers Fastest DVD Ripping Speed
While the best part of HandBrake is that it provides highly flexible video parameter settings, the worst part is that those settings only serve you well when the input is non-commercial DVD. It is more of a video transcoder, with no copy protection bypassing function. Freemake allows you to personalize DVD video, but lacking in editing features. Inside WinX DVD Ripper, all advanced video settings like bitrate, resolution and aspect ratio are available to change. Also you can crop unwanted area, trim video, merge clips, add subtitles, etc.
Video Editing Features
* Ripping time varies based on your equipment level
Good-quality viewing experience is where we're all headed, but it shouldn't be done at the cost of huge file size. It takes WinX DVD Ripper and HandBrake 9.33 minutes and 12 minutes, respectively, to rip a 2.5-hour disc but output in 1.24 GB and 6GB. A short time gap makes a vast difference in file size. That actually is caused by compression ratio. Obviously, WinX DVD Ripper is more adept at ripping DVD fast and remaining high quality in small file size.
HandBrake Outputs Large Video, WinX DVD Ripper Keeps Balance between Quality and Size
Here’s how to rip DVD to MP4 with WinX DVD Ripper. Only three steps are needed:
1. Click "DVD Disc" to choose and load your disc content.
2. Select MP4 as the output format in the pop-up Output Profile center.
3. Press RUN button to start the backup. Tips: Don't forget to tick the Hardware accelerator box in the main interface.
Step 3. How to Rip a DVD Disc with WinX DVD Ripper
[In-Depth] WinX DVD Ripper - The Only Level-3 Hardware Accelerated DVD Ripper
Don't rush to freeware blindly, or you may get virus as "bonus". A little tip to preliminarily recognize if it's safe to download or not: software for running on Windows or Mac is ended with .exe or .dmg. For example, xxx-dvd-ripper.exe.flv should be an unsafe file. You can still use software with no upgrades, but there may be a lot of problems when ripping new DVDs.
Don't Use Such Software, Even If It's Free
To sum up, these are the three steps to ripping a DVD. If you have a large collection of DVD discs and you are going to keep purchasing, the paid version of WinX DVD Ripper might be more appropriate for you. Free lifetime upgrades ensure the support for any new movie DVDs. Learn of WinX DVD Ripper Platinum Edition >