8
7
6
5
4
3
2
1
16
15
14
13
12
11
10
9
19
18
17
Backlit LED/LCD Status Display
Provides at-a-glance visibility of key system status and operating information
Sync and Alarm Status LEDs
Clearly indicate synchronization state and active alarm conditions
Front-Panel Navigation Buttons
Allow users to scroll through display menus and view system information locally
USB-C Administration Port
Provides local management access through a web browser or SNMP interface
RJ45 Ethernet Administration Port
Enables network-based management using web browser access or SNMP
Dual Copper Ethernet Timing Ports
Two 10/100/1000 Mbps copper ports for Ethernet-based timing distribution, supporting PTP, NTP and PRP redundancy for timing applications
Six Fixed SFP Timing Ports
Six 10/100/1000 Mbps SFP ports for copper or fiber timing connections, supporting PTP, NTP, PRP redundancy and SyncE timing applications
Configurable Ethernet / SFP+ Timing Ports
Two ports supporting 10/100/1000 Mbps Ethernet or 10 GbE SFP+ fiber/DAC connections for PTP, NTP, PRP and SyncE timing applications
RJ-48 Telecom Timing Ports
Two framed E1/T1/J1 telecom ports for legacy timing and synchronization interfaces
Click the Buttons to Learn More
Configurable Frequency/Time-Code Outputs
Two BNC outputs supporting DCLS IRIG-B, user pulse, DCF77, or 1.544/2.048/10 MHz sine- or square-wave frequency outputs
Configurable Time-Code Outputs
Four BNC outputs supporting DCLS IRIG-B, user pulse, DCF77 or AM IRIG-B time-code signals
Configurable Time-Code Outputs / IRIG-B Input
Two BNC ports configurable for DCLS IRIG-B, user pulse, DCF77 output or IRIG-B input
Serial Time String Outputs
Two RJ-12 serial ports providing ASCII time strings at RS-232 and RS-422 signal levels
Optical Pulse Outputs
Two ST fiber outputs supporting IRIG-B, user-defined pulse, or DCF77 timing signals
Ground Lug
Provides chassis grounding for safe and reliable system installation
High-Voltage MOSFET Pulse Output
One two-pin high-voltage MOSFET pulse port supporting IRIG-B, user-defined pulse or DCF77 output
Alarm Relay Outputs
Two three-pin alarm relays with normally open and normally closed contacts for external alarm signaling
GNSS Antenna Connector
One TNC antenna connector supporting L1 and L2 GNSS reception
Redundant Power Supply Slots
Two power supply slots supporting AC/DC input options, including 120–250 VDC, 100–240 VAC or 24–120 VDC