CAN/CAN FD Transceiver
70–100 MHz CPU with DSP engine for accelerated processing
8–24 KB RAM and 64–256 KB Flash Memory
Dual WDTs and a DMT provide code execution monitoring options
dsPIC DSC
Wake up via LIN bus or external wake-up pin
Fully LIN compliant to LIN 2.0, 2.1, 2.2, 2.2A and SAE J2602-2
Fully ISO 11898-2, ISO 11898-2: 206 and SAE J2962-2 Compliant
High-Speed CAN/CAN FD Transceiver (up to 5 Mbps)
LIN Transceiver
Sleep mode 5 uA,
3.3V/5V programmable LDO (70 ma), wake-up pin
Shoot through, overcurrent, and short-circuit protection, 40V transient capability
12V/0.5A gate drivers with programmable blanking time
Gate Driver
12-bit ADCs, up to 3.5 Msps, 3 op amps and comparators with 12-bit DACs
32-bit optical/incremental encoder interface
Cap-less, on-chip LDO
Clock monitor with multiple redundant clock sources
Node authentication and more
Secure boot, secure firmware upgrade and secure communication
Flash configurable as OTP with read and write protection
Safety and Security Features
Click the red outlined boxes
above for more information.
Fully ISO 11898-2,
ISO 11898-2: 206 and SAE J2962-2 Compliant
®
®
Sleep mode 5 uA, 3.3V/5V programmable LDO (70 ma), wake-up pin
